Standard bearing petroleum oils without additives. They are produced in various viscosity grades.

Very performant bio-degradable cleaning fluid, especially designed for cleaning tar.

Highly refined mineral and high-tech hydrokracked base oils oils with a complex mixed additive. They have excellent thermal and oxidative stability, outstanding resistance against carbon deposits, very good anti-abrasion and rust-protection properties, very low evaporation rate and excellent

It is modern conceived set of cutting oils designed mainly for machining centers and machining lines executing various machining operations in a wide specter of ferrous metals. These cutting oils dispose of a wide range of attributes, which allow not only complex machining operations in the

Suitable for the majority of the closed refrigerator systems, operating at very low evaporator temperatures and high terminal loads. Can be used for the hermetic units fitted to domestic refrigerators and deepfreezes including industrial cooling systems who work with refrigerants like

Product manufactured from high-quality mineral oil thickened with lithium soap. Universal lubricants designed for a wide application range.

SLIDEWAY oil (THREE different ISO VG Classes), mainly intended for the lubrication of machine tools slideways. Prevents stick-slip, has extreme pressure, anti-rust properties, contains an additive for adhesivity and lubricity.

Corrosion fluids of brown color containing additive of absorbing corrosion inhibitors. They do not cause so-called contact corrosion. They will stop further corrosion if they are used on corroded places, so-called stop-effect. Relative protective performance Ur (%) 30 days, in % of vol. 97-100.

TECHNICAL MINERAL WHITE oil is a cost effective solution for customers requiring non-toxic, odourless, tasteless water white products. Relatively low volatility and high flash points compared with solvent neutral base stocks of equivalent viscosity. This  oil can provide exceptionally good

Naphthetic transformer oil gained out of a special and very strict refinement process. This oil comes up to the characteristics demanded by the most important national and international institutions. (IEC 296/1982) Its formulation is designed to provide high dielectric strenght, excellent oxidation

BETONUS SD is a standard performance moulding oil used for separation of concrete products from wooden and some metal types of moulds and forms used in building industry. BETONUS SD is made of high quality low viscosity base oil and a package of active additives.

Mineral oils with improved thermal and oxidative stability, with favourable low-temperature performance and good demulsifying characteristics. They are used primarily for lubrication of air and gas reciprocating compressors, also as fills for some industrial gearboxes and circulation

It is modern conceived set of cutting oils designed mainly for machining centers and machining lines executing various machining operations in a wide specter of ferrous metals. These cutting oils dispose of a wide range of attributes, which allow not only complex machining operations in the

MEDICINAL MINERAL WHITE is a light paraffin liquid suitable for Pharmaceutical, Cosmetics & Food Industries for direct and indirect Food contact. Medicinal, pharmaceutical and veterinary uses, internal lubricants as laxatives, antifoaming for the production of penicillin. In cosmetic preparations

A range of synthetic, PAO based, heavy duty gear oils (THREE different viscosity classes), primarily recommended for enclosed gear units working under severe shock conditions.

High quality hydraulic oils with strong anti-corrosion/oxidation, anti-wear properties. Can be used in moderate or severe conditions and various temperatures according to different ISO VG Classes.

Agent designed for treatment and stabilization of pH value of machining in upward direction. It is applied during operation of machining liquid, in case of reduction of pH value under the limit of 8, directly into machining liquid in a concentration of 0.3-0.35%. After a short circulation of machining

Corrosion fluids of brown color containing additive of absorbing corrosion inhibitors. They do not cause so-called contact corrosion. They will stop further corrosion if they are used on corroded places, so-called stop-effect. Relative protective performance Ur (%) 30 days, in % of vol. 97-100.

Has the same properties as TRANSFOL INHB, just this oil is RED DYED for easier tracking of illegal use.

Biocide agent designed for microorganisms termination used especially against their outbreak in machining liquid. It is applied during higher concentrations of microorganisms which is mainly accompanied by reduction of pH value directly into machining liquid in a concentration of 0.1-0.2%.

Air pump petroleum oil with low pressure of saturated steam up to 0.133 Pa at 25°C and with corresponding flash point.

Emulsifying oil a mixture of petroleum oils and synthetic components. It is marked with high stability and bio-resistance. It has excellent lubricating and cooling ability. It fully complies with requirement for efficient lubricating and cooling liquid.

A range of synthetic, POYGLYCOL based, heavy duty gear oils (FIVE different viscosity classes), primarily recommended for enclosed gear units working under severe conditions. Provide excellent protection against high loads.

High quality hydraulic oils with strong anti-corrosion/oxidation, anti-wear and detergent/dispersant properties. Specially developed for applications where problems with water condensation occur.

Conservation oils of 200 series are petroleum oils of yellow color with additive of complex corrosion inhibitor. They have ability to displace water from metallic surfaces and efficiently neutralize finger prints. They can be applied easily and form very thin homogenous oil film (2-10 μm) with excellent

Deeply refined petroleum oils containing additives for increasing cooling speed, thermal and thermo-oxidative stability. They have high inflammation point and fire point, small evaporation capacity and very low tendency to create sludge. They guarantee even through-quenching of

Biocide agent used for conservation of machining liquid. Its effective components prevent microorganisms outbreak. It is applied roughly after 10-day intervention by biocide agent BIOCLEAN-P in concentration of 0.1-0.2% directly into machining liquid.

Modern emulsifying oil conceived on a basis of derivate of lactic acid, containing selected petroleum oils, emulsifiers, efficient de-foamer and corrosion inhibitors. With water, it creates micro emulsion with high stability, resistance against microorganisms and from it resulting long lifetime, stable pH,

Petroleum products thickened with aluminium, calcium or lithium soaps and, if appropriate, improved with suitable additives. They are used for a relatively narrow, usually quite well specified application range.

Conservation oils of 200 series are petroleum oils of yellow color with additive of complex corrosion inhibitor. They have ability to displace water from metallic surfaces and efficiently neutralize finger prints. They can be applied easily and form very thin homogenous oil film (2-10 μm) with excellent

Deeply refined petroleum oils containing additives for increasing cooling speed, thermal and thermo-oxidative stability. They have high inflammation point and fire point, small evaporation capacity and very low tendency to create sludge. They guarantee even through-quenching of

Efficient, modern conceived cutting oils designed mainly for machining operations of deep drilling by BTA or Ejektor systems. Both oils are equipped by high content of esters of higher fatty acids, AW additives, EP additives and corrosion inhibitors. By this, they allow execution of efficient machining

Petroleum products thickened with aluminium, calcium or lithium soaps and, if appropriate, improved with suitable additives. They are used for a relatively narrow, usually quite well specified application range.

Deeply refined petroleum oils containing additives for increasing cooling speed, thermal and thermo-oxidative stability. They have high inflammation point and fire point, small evaporation capacity and very low tendency to create sludge. They guarantee even through-quenching of

A synthetic di-ester based compressor oil Recommended for the crankcase and cylinder lubrication of reciprocating air compressors. Hatlapa, Sperre, Tanabe (H-type) compressors.

Emulsifying petroleum oils are mixtures of petroleum oil fractions, emulsifiers, inhibitors of corrosion and biocides against premature microbial decomposition. With water, it creates uniform milky emulsion.

Modern conceived water-soluble agents, they are mixtures of suitable inhibitors of corrosion and water. After water evaporation, thin dry protective layer remains on the surface of conservation material. Agents of 400 set do not contain petroleum hydrocarbons and they are well biologically

They are efficient cutting oils with content of special substances for increasing of cutting effect and further improving additives. They are chemically stable with efficient protection against corrosion. They are marked with high cutting effect and positively influence quality, harshness and

Products manufactured from high-quality mineral base oils thickened with lithium soap. Universal lubricants designed for a wide application range.

They are efficient cutting oils with content of special substances for increasing of cutting effect and further improving additives. They are chemically stable with efficient protection against corrosion. They are marked with high cutting effect and positively influence quality, harshness and

Synthetic metal working liquids are mixtures of synthetic components, suitable inhibitors of corrosion and water. SK300 in addition contains lubricating additive. They are marked with high stability and bio-resistance. Corrective coefficient for refractometer equals 2.

They are efficient cutting oils with content of special substances for increasing of cutting effect and further improving additives. They are chemically stable with efficient protection against corrosion. They are marked with high cutting effect and positively influence quality, harshness and

Products manufactured from high-quality mineral base oils thickened with lithium soap. Universal lubricants designed for a wide application range.

Products manufactured from high-quality mineral base oils thickened with lithium soap. Universal lubricants designed for a wide application range.

Products manufactured from high-quality mineral base oils thickened with lithium soap. Universal lubricants designed for a wide application range.

Products manufactured from high-quality mineral base oils thickened with lithium soap. Universal lubricants designed for a wide application range.

Cutting oils designed for finishing machining operations, where blade geometry is not accurately defined. During their formulation, there were used high-quality base oils of high flash point, minimal evaporation loss and ideal sedimentary ability. Maximally reduced fuzzing and suitable selection of

Cutting oils designed for finishing machining operations, where blade geometry is not accurately defined. During their formulation, there were used high-quality base oils of high flash point, minimal evaporation loss and ideal sedimentary ability. Maximally reduced fuzzing and suitable selection of

Petroleum cutting oils containing additives for cutting efficiency. They include also anti-mist additive, which reduces aerosol creation to minimum and therefore contributes to work environment improvement. They are suitable for machining of ferrous and non-ferrous metals.

Petroleum cutting oils containing additives for cutting efficiency. They include also anti-mist additive, which reduces aerosol creation to minimum and therefore contributes to work environment improvement. They are suitable for machining of ferrous and non-ferrous metals.

Products manufactured from mineral oils thickened with calcium or lithium soaps; some of them are improved with suitable additives or fillers to enhance performance. They are typically used for a specific application area limited by the type of machinery part or temperature and other conditions.

Products manufactured from mineral oils thickened with calcium or lithium soaps; some of them are improved with suitable additives or fillers to enhance performance. They are typically used for a specific application area limited by the type of machinery part or temperature and other conditions.

Products manufactured from mineral oils thickened with calcium or lithium soaps; some of them are improved with suitable additives or fillers to enhance performance. They are typically used for a specific application area limited by the type of machinery part or temperature and other conditions.

This category of lubricants is characterized by their relatively easy biodegradability – they are more environmentally compatible greases than common petroleum oil based lubricants. They are manufactured from natural vegetable or synthetic oil bases thickened with aluminium or lithium

This category of lubricants is characterized by their relatively easy biodegradability – they are more environmentally compatible greases than common petroleum oil based lubricants. They are manufactured from natural vegetable or synthetic oil bases thickened with aluminium or lithium

Mixture of solid petroleum products, viscous oil, graphite and improving additives. Intended for lubrication and conservation of block chains.

Solid lubricants are complementary products applied when properties of common liquid or grease are not sufficient. It is typically lubrication of machinery parts under high pressures or high temperatures; they are frequently used for technological purposes or as improving components for

Blends of mostly solid paraffin hydrocarbons obtained from de-waxing of highly refined mineral oils. The respective grades are characterized by pour point and oil content values. They are usually used for candle production, in cosmetic and pharmaceutical industries, for food processing purposes

Blends of mostly solid paraffin hydrocarbons obtained from de-waxing of highly refined mineral oils. The respective grades are characterized by pour point and oil content values. They are usually used for candle production, in cosmetic and pharmaceutical industries, for food processing purposes

Blends of mostly solid paraffin hydrocarbons obtained from de-waxing of highly refined mineral oils. The respective grades are characterized by pour point and oil content values. They are usually used for candle production, in cosmetic and pharmaceutical industries, for food processing purposes